“Hydraulic ram” can mean a cylinder generally, a single-acting ram/plunger actuator, or equipment-specific terminology. Ignore the label until acting type, pressure area, return method and mounting are defined.
Single- vs Double-Acting
Single-acting actuators receive pressure in one direction and rely on gravity, spring or external load for return. Double-acting cylinders use pressure both ways.
Piston Rod vs Plunger
A conventional cylinder uses a piston and rod; a plunger actuator can apply pressure to a ram area without a full double-acting piston arrangement.
Select From Machine Function
Lifting, clamping, steering and tipping impose different load-holding, speed and mounting requirements.
Additional Hydraulic Ram Terminology Reference
For additional terminology and application context, see this hydraulic ram reference. For replacement or new-build selection, verify the actual actuator dimensions, acting type, mounting, ports and duty against the machine.
أسطوانة هيدروليكية مزدوجة الفعل من سلسلة EP-KWA
سلسلة أسطوانات EP-KWA المترية مزدوجة الفعل مع بيانات التجويف، والقضيب، والشوط، والقطر الخارجي، والطول، والمنفذ، والوزن.
EP-SP Series Snow Plow & Utility Hydraulic Cylinder
EP-prefixed snow-plow replacement cylinder range with dimensional, port, temperature and weight data.
EP-KWI Series Metric Plunger Hydraulic Cylinder
EP-KWI metric plunger cylinder series with stroke, diameter, length, port and weight data.
أسطوانة هيدروليكية ملحومة من خلال الفتحة من سلسلة EP-WP بقوة 3000 رطل لكل بوصة مربعة
سلسلة أسطوانات EP-WP الملحومة ذات الثقوب مع أبعاد النموذج والضغط وحمل العمود وبيانات المنفذ.
Frequently Asked Questions
Is ram always the same as cylinder?
No; the term is used inconsistently.
What makes single-acting different?
Pressure drives one direction; another force returns it.
Can single-acting replace double-acting?
Not without circuit redesign and machine verification.
What measurements still matter?
Stroke, closed length, pressure area, mounting and ports.
What should be verified before ordering?
Confirm acting type, stroke, closed length, pressure area, mounting, ports and operating duty against the machine.
ناقش متطلباتك الهيدروليكية
أرسل تفاصيل القطر الداخلي، والشوط، وطريقة التركيب، والضغط، والمنافذ، والحمل، والتشغيل. بالنسبة للقطع البديلة، أرفق صورًا وقياسات دقيقة.