الوصف
The EP-WAC Series combines welded construction with an adjustable clevis rod-end interface. Adjustment is useful for linkage setup, but correct stroke, thread engagement and alignment remain essential.
EP-WAC Model Data
Maximum retracted working pressure is 3,000 psi; maximum extended pressure varies by model. Retracted length and stroke tolerance is ±1/8 in. Dimensions A and E are reference values because the clevis is adjustable.
| Model | Bore × Stroke | Retracted | Extended | Column Load | Pressure | Weight | Port |
|---|---|---|---|---|---|---|---|
| EP-WAC30150408 | 1.5 × 4 in | 14-1/4 in | 18-1/4 in | 5,300 lb | 3,000 psi | 10 lb | SAE 6 |
| EP-WAC30201209 | 2 × 12 in | 22-1/4 in | 34-1/4 in | 9,400 lb | 3,000 psi | 22 lb | SAE 8 |
| EP-WAC30251410 | 2.5 × 14 in | 24-1/4 in | 38-1/4 in | 14,700 lb | 3,000 psi | 28 lb | SAE 8 |
| EP-WAC30301612 | 3 × 16 in | 26-1/4 in | 42-1/4 in | 21,200 lb | 3,000 psi | 38 lb | SAE 8 |
| EP-WAC30351614 | 3.5 × 16 in | 26-1/4 in | 42-1/4 in | 28,800 lb | 3,000 psi | 47 lb | SAE 8 |
| EP-WAC30401616 | 4 × 16 in | 26-1/4 in | 42-1/4 in | 37,600 lb | 3,000 psi | 57 lb | SAE 8 |
Selected 8 in and 16 in stroke configurations are listed with ASAE mounting variants. NPT port options are also identified for the series.
Adjustment & Installation
Document the usable clevis adjustment, required thread engagement and locking method. Verify articulation through the full linkage travel so the rod is not loaded in bending.
