Описание
The EP-WAC Series combines welded construction with an adjustable clevis rod-end interface. Adjustment is useful for linkage setup, but correct stroke, thread engagement and alignment remain essential.
EP-WAC Model Data
Maximum retracted working pressure is 3,000 psi; maximum extended pressure varies by model. Retracted length and stroke tolerance is ±1/8 in. Dimensions A and E are reference values because the clevis is adjustable.
| Model | Bore × Stroke | Retracted | Extended | Column Load | Pressure | Weight | Port |
|---|---|---|---|---|---|---|---|
| EP-WAC30150408 | 1.5 × 4 in | 14-1/4 in | 18-1/4 in | 5,300 lb | 3,000 psi | 10 lb | SAE 6 |
| EP-WAC30201209 | 2 × 12 in | 22-1/4 in | 34-1/4 in | 9,400 lb | 3,000 psi | 22 lb | SAE 8 |
| EP-WAC30251410 | 2.5 × 14 in | 24-1/4 in | 38-1/4 in | 14,700 lb | 3,000 psi | 28 lb | SAE 8 |
| EP-WAC30301612 | 3 × 16 in | 26-1/4 in | 42-1/4 in | 21,200 lb | 3,000 psi | 38 lb | SAE 8 |
| EP-WAC30351614 | 3.5 × 16 in | 26-1/4 in | 42-1/4 in | 28,800 lb | 3,000 psi | 47 lb | SAE 8 |
| EP-WAC30401616 | 4 × 16 in | 26-1/4 in | 42-1/4 in | 37,600 lb | 3,000 psi | 57 lb | SAE 8 |
Selected 8 in and 16 in stroke configurations are listed with ASAE mounting variants. NPT port options are also identified for the series.
Adjustment & Installation
Document the usable clevis adjustment, required thread engagement and locking method. Verify articulation through the full linkage travel so the rod is not loaded in bending.
Компактный гидравлический силовой агрегат постоянного тока серии EP-HPU-DC
Компактный гидравлический силовой агрегат EP-HPU-DC с возможностью настройки для работы с цилиндрическими контурами, питаемыми от аккумулятора или транспортного средства.
Гидравлический силовой агрегат переменного тока серии EP-HPU-AC
Конфигурируемый гидравлический силовой агрегат переменного тока EP-HPU-AC для стационарных промышленных цилиндровых систем.
